Heat Shrinkable Tube

Heat Shrink Tube 1.Operating at -55 degree - 125 degree; 2.Shrink at 110 degree; 3.Shrink ratio: 2:1; 4.UL,RoHS compliant

Product Introduction for heat shrink tube

This product can avoid accidental injure to overhaul persons by touching uncovered conductors, and prevent busbar from chemical corrosion effected by salt spray or other chemical gas or liquid.It also avoids short circuit fault caused by samll animals and provides excellent insulation to protect busbar systems and reduce the distance between busbar and ground.

Characteristic:  

1.Operating Temperature:-55 degree - 125 degree;2.Shrink Temperature:110 degree;3.Shrink ratio: 2:1;4.UL,RoHS compliant

Standard Colors:

Red, Black, Yellow and Green.

Technical Data:

PROPERTY		TEST CONDITION		TYPICAL  DATA		TEST METHOD
Radial Shrinking Ration		130/2min		≥50%
Longitudianl Shrinking Ratio		130/2min		≤5%
Hardness Shore D				≤90		GB2411-1980
Water Absorption				≤0.5%		GB/T1034-1988
Tensile Strength				≥10.4Mpa		GB/T1040-1992
Elongation				≥300%		GB/T1040-1992
Tensile Strength After Aging		130168hr		≥7.3 Mpa		GB/T1040-1992
Elongation After Aging		130168hr		≥100%		GB/T1040-1992
Volume Resistivity				≥4.3x1014Ω·cm		GB/T1410-1989
Dielectric Strength				≥15KV/mm		GB/T1408.1-1999
Oxigen Index				≥300%		GB/T2406-1993
Offset Rate				≤30%		UL224
Cold Bend		-40x1hr		no cracking		UL 224
Heat Shock		160x4hr		no cracking,no bleeding		UL 224
A.C. Voltage Withstand		1min		≥30KV		ASTM D2671

Heat Shrinkable Tube